Pool Resurface Process

Learn About Pool Resurface Process

Ybor City Museum State Park, Tampa Florida

The reason why pool resurfacing is done is to keep it in good usable condition. It also considered being one of the best ways of maintaining cleanliness at the surface of the pool. If you notice that the surface of your pool is getting rough or discolored, then you might be required to resurface it in order to improve its appearance.

How To Resurface Your Pool?

Pool resurfacing is not an easy task and for most pool owners, they choose to hire a pool contractor to carry out the task for them. However, with the right tools and a guide, you can be able to do this on your own and save the cost of hiring a pool contractor.

Materials Used During Resurfacing Process

The first thing you need to do is gather all the necessary materials needed for the task ahead. In this case, what you will need is a mask, sandpaper, power washer, and roller. Do not use any chemicals or solutions that are not recommended by a professional contractor. Furthermore, make sure that you consult a pool resurfacing expert in regards to any new products available for pool resurfacing.

Steps To Take During Swimming Pool Resurfacing Process

1.Drain The Water

You cannot resurface the swimming pool when it is full of water and wet. Make sure that you drain away the water so that you can start the resurfacing process. However, before you drain the water from the pool, it is advisable that you find out from the local authority the recommended way of draining pool water. Some cities may allow you to drain water into the sewer, while others may suggest that you use a sump pump for such a project.

2. Clean The Entire Swimming Pool

Once you are done draining the water away, the next thing you need to do is make sure that the pool is clean at each ends. That means you need to get rid of any debris that may be found at the surface of the swimming pool. The best way of cleaning a pool surface is to pressure wash. That is because it can easily remove tough stains as well as algae. However, you also need to be aware of the fact that this method is most effective on concrete and plaster materials.

For tiles and other materials, you might be required to use chemical treatment and even a brush for scrubbing. That is why you are required to have a mask and gloves during pool resurfacing so that you do not get affected by some of these chemicals used for pool resurfacing process.

3. Prepare The Swimming Pool’s Surface

Once the surface of the swimming pool is clean and completely dry, make sure that it is in good condition by checking the pool structure. Find out whether it has holes or cracks and if you spot such damage, make sure that you repair it using underwater pool patching. However, the type of underwater pool patching you use will depend on the style of pool you own. That is why it is advisable that you consult a contractor to recommended the best pool patching for your swimming pool.

4. Apply Primer On The Surface

When it comes to refinishing options, most epoxies require you to start by priming the pool surface using a primer epoxy specifically meant for swimming pool surface. Moreover, make sure that you wear a mask when handling the primer since it produces harmful fumes, which can affect health. Do not remove the mask or gloves until you are done painting the entire swimming pool surface.

5. Finish The Swimming Pool’s Surface

After applying the primer on the surface, wait for it to dry before you move on to the next step. How long it takes to apply the primer on the surface depends with the scale of the pool. However, it only takes three hours or less of less for it to dry and then you can proceed on to finish the pool’s surface. Using topcoat epoxy, start painting the surface of the swimming pool from the deep to the shallow end.

Furthermore, request for topcoat epoxy that has a different color from the primer that you use, so that it can be easy to identify areas that may require more topcoat painting. Moreover, it is advisable that you read and follow the coating instructions and recommendations of the manufacturer to use the product correctly.

6. Wait For The Surface To Dry Before Refilling

Once you are done applying the epoxy, wait for the surface to dry for at least seven days. After this period, you can refill the swimming pool and enjoy clean water that is free from fumes, stains, and even debris.

Conclusion

Pool resurfacing is something that you can do on your own. However, you can always hire a swimming pool contractor if you are not sure about what to do. Such services are easy to find and affordable. Read in our next article: How To Find A Pool Resurfacing And Repair Company?